BioAXS Finger Print Door Access Control System:
The
System consists of the following components:
- BioAXS Software Solution
- An Electric
Lock.
- Digital
Persona’s embedded Device V1003
- A BioAXS recommended PC which may
be connected to the Finger Print device when needed to download/upload
data.
BioAXS provides a software solution to process IN / OUT times from Finger Print device in form of Reports acceptable and usable by any organization as
per their needs. This solution is based on Digital Persona’s embedded
Device V1003. It’s suitable for all sorts of businesses. Each Device
works as an intelligent device and can store, process data on its own.
BioAXS software can also be used to register employees using a normal Digital
Persona URU 4000 B reader and upload data to the Embedded Device.

Main
features of Finger Print Device are as below:
Easily
manageable Door Control System with use of digital persona Finger Print sensor
Multiple
Authentications: Finger Print , Password
Finger Prints
capacity: 600/1000/1500
Transaction
Storage
capacity:
30K/50K
Identification
Time: less than 2 seconds
FRR: Less than and equal to 0.1%
FAR: Less than and Equal to 0.0001%
Communication: RS232, TCP/IP or RS485
Power: 12V DC, Idle current 50mA, working current 400mA
Operational
Temperature: 0 to 45 Degree Centigrade
Operational
Humidity: 20% to 80%
Software
Features:
1. Solution requires a customer provided, our
recommended, computer connected to Ethernet Device (Embedded
Microcontroller) via LAN
2. Software provides easy interfaces to communicate
with the Ethernet Device to upload / download data
3. One premises installation
4. Number of Authentications – Number of
authentications allowed per licensed installation depends on the
hardware capacity but BioAXS Software allows companies to download all the data to a Networked PC.
5. Logins – Administrator for full access. Access can
be on Username/Password or on Finger Prints or without any
authentication
6. Company information – Name and address
7. Department Name information.
8. Employee Creation – Data entry of employee through
manual process – Inputs are restricted to Name, Employee ID and
Department
9. Employee Finger Print registration – option of all
10 fingers with minimum 1 fingers registration.
10. Employee
De-activation – De-activating an employee for restricting Finger Print attendance (administrator mode only)
11. Manual
input of attendance – Entering manual attendance of both incoming and
outgoing time
12. Real
Time Reports in Crystal Reports, MS Word, Text, Excel or Word Pad
formats.
13. Time
Attendance Software only, with output in Microsoft SQL, My SQL Table
Format
14. Output
of authentication data on a computer Monitor
15. Database
schema will be locked and only authenticated data table will be
provided to the client.